- 5th Floor, East Ruyi Building, Xinxiang, Henan, China
- info@nybonmachinery.com
- +86-373-3806633
A single girder gantry crane is one of the most practical lifting solutions for factories, warehouses and open yards. It uses one main girder supported by two legs, which keeps the structure light and the cost low. This design makes it a popular choice for businesses that need reliable lifting without the expense of a double girder system.
Nybon Machinery designs and builds single girder gantry cranes for customers across many industries. Each crane is engineered for safe daily use, easy installation, and long service life. Whether you need a small unit for a workshop or a heavy-duty crane for a busy yard, we can match the design to your working conditions
Some job sites do not have space for legs on both sides of the crane. In these cases, we offer a single girder semi gantry crane, also known as a single leg gantry crane. One end of the girder runs on an elevated rail fixed to an existing building or steel structure, while the other end runs on a ground level rail supported by a single leg. This setup saves floor space and works well in workshops with limited width
An affordable option for small workshops, tool rooms and light assembly lines. It handles frequent light lifting with minimal setup requirements.
Suitable for small to medium workshops that need dependable daily lifting for parts, machinery components or packaged goods
Built for heavier material handling in steel yards, precast concrete plants and larger warehouses that need stronger lifting capacity
We also offer light duty gantry crane models for businesses that need occasional lifting rather than continuous heavy use.
Below is the standard technical parameter table for our single girder gantry crane. All specifications can be fully customized to meet your specific project requirements, including load capacity, span, lifting height, power supply, control system, and structural design. Contact us to discuss your needs and get a tailored solution.
| Parameter | Standard Specification | Customizable Range |
|---|---|---|
| Load Capacity | 1-20 Ton | 0.5-30 Ton |
| Span | 5-30 Meters | 3-35 Meters |
| Lifting Height | 6-20 Meters | 3-30 Meters |
| Lifting Speed | 3.2-16 m/min | 1-20 m/min (Variable Speed Optional) |
| Travelling Speed | 20-40 m/min | 10-60 m/min (VFD-Controlled Optional) |
| Working Class | A3-A5 (FEM/ISO Standard) | A1-A5 |
| Power Supply | 380V/50Hz/3Phase | 220V-480V, 50/60Hz (Regional Standards) |
| Control System | Pendant Control / Wireless Remote Control | Cabin Control / PLC Control (Optional) |
| Operating Environment | -20°C to +50°C, IP55 Protection | High Temperature/Corrosion-Resistant (Custom) |
| Hoist Type | Electric Wire Rope Hoist / Chain Hoist | Custom Hoist Type Based on Needs |
Nybon has years of experience manufacturing overhead and gantry cranes for export markets. Every single girder gantry crane is built using quality steel and tested before shipment to meet strict safety standards. We offer customization for lifting capacity, span, lifting height and control type, so the final crane matches your exact working conditions.
Our team supports customers from initial inquiry through installation, with clear technical guidance at every stage. If you need a single girder gantry crane, a single leg gantry crane, or a light duty model for smaller tasks, we can help you choose the right specification for your project.
Contact Nybon today to get a quote for your single girder gantry crane project.
We comply with international quality and safety standards.
Tell us your requirements and our engineering team will provide a tailored lifting solution with competitive pricing within 24 hours.
At Nybon Machinery, we understand that every project has unique requirements. That’s why we offer fully customizable single-girder gantry crane solutions to meet your specific needs. Our engineering team will work closely with you to tailor the crane’s specifications, including load capacity, span, lifting height, control system, and structural design (such as cantilever length, leg type, and coating). Whether you need a crane for a narrow workshop, a harsh outdoor environment, or a specialized lifting task, we can design a solution that fits your exact requirements. We also offer optional features like anti-sway systems, laser-guided positioning, and special corrosion-resistant coatings for coastal or industrial areas. Contact us today to discuss your customization needs and get a free design proposal.
It is used to lift and move materials in warehouses, workshops, yards and ports. It works well for general material handling tasks.
A single girder crane has one main beam and suits lighter loads. A double girder crane has two beams and handles heavier loads over longer spans.
It is a semi gantry crane with one leg on the ground and the other end running on an elevated rail. It is used when floor space is limited
Common sizes include 1 ton, 2 ton, 3 ton, 5 ton and 10 ton. Higher capacities are available on request.
Yes. It can be built with weather protection features for outdoor use in yards, ports and construction sites
Yes. It uses less steel than a double girder crane, which lowers manufacturing cost and installation time
