Explosion-proof Hoist
Brief introduction of explosion proof electric hoist
Explosion-proof hoist: aluminum bronze and beryllium bronze are used as blanks, and the shell of the chain hoist is made of H62 copper alloy material.
Explosion-proof hoist is a very important preventive measure to ensure personal safety and the safety of various production, storage and conveying systems when the surrounding environment produces explosive mixtures mixed with flammable gas, dust and air during the use of industrial hoists.
Before using the European hoist, check that there should be no obstacles within the operator’s walking range and the route where heavy objects pass. The up and down, left and right directions of the manual buttons should be accurate and sensitive, and the motor and reducer should have no abnormal sound. Make sure that there are no foreign objects on the running track of the electric hoist. And the wire rope should be free of obvious defects, neatly arranged on the drum, no signs of disengagement from the pulley groove, and well lubricated.
Nybon Explosion-proof Hoist
We can accept OEM for the lifting equipment you’re looking for,should you need any further information,please feel free to leave us a message.
Capacity of electric hoist: 0.1T 0.25T 0.5T 1.5T 1T 2T 3T 5T 10T 20T 25T 30T 50T 60T. Electric hoist installation and use: hoist single girder, bridge crane, gantry crane, hanging crane. It can also be used for hoisting. Therefore, electric hoist is one of the commonly used lifting equipment in factories, mines, ports, warehouses, freight yards, shops, etc., which is to improve labor efficiency. Essential machinery to improve working conditions.
NYBON Explosion-proof Electric Hoist ：The rotating gear of the explosion-proof hoist has undergone high temperature heat treatment to achieve high wear resistance of the gear. The explosion-proof chain hoist bracelet has small pulling force, light weight, easy to carry, beautiful appearance, small size and durability.
Wire Rope Hoist
Polipasto de cableWire Rope Hoist
Electric wire rope hoist is small lifting equipment with the advantages of compact structure, lightweight, small volume, strong universality of parts and convenient operation, etc. It is mainly used for various lifting, pulling, loading, and unloading heavy objects.Chain Hoist
Polipasto de cadenaChain Hoist
The weight of the electric chain hoist is generally 0.1 to 60 tons, and the lifting height is 3 to 120 meters. The characteristics of the electric chain hoist: advanced performance structure, small size, lightweight, reliable performance, convenient operation, and wide application range.New Type Hoist
Nuevo tipo de polipastoEuropean standard Hoist
The European hoist adopts a unique design concept, which has the characteristics of small size, lightweight, and small wheel pressure. Compared with traditional cranes, the limit distance from the hook to the ground (floor) is the smallest, and the clearance height is the lowest.
Safety advice of the hoist
Precautions during the use of hoist
1. The electric hoist that is installed or reassembled for the first time should be operated without load first, but make sure that the components are installed properly and do not energize.
2. Before normal use, a static load test should be carried out with 125% of the rated load, lifting about 100 mm from the ground, and 10 minutes, and check whether it is normal.
3. The electric hoist should be operated by a special person, and the operator should fully grasp the safety operation rules.
4. In use, the electric hoist must be checked regularly by specialized personnel, and measures should be taken in time if any faults are found, and they should be carefully recorded.
5. Sufficient lubricating oil must be maintained during the use of the electric hoist, and the lubricating oil should be kept clean and should not contain impurities and dirt.
6. When the electric hoist is not working, it is not allowed to hang heavy objects in the air to prevent permanent deformation of the parts.
7. During use, if a fault is found, the main power supply should be cut off immediately.
| Single Speed | Technical Parameters | |||||||||
| Model | SSDHL | |||||||||
| 0.5-01S | 01-01S | 1.5-01S | 02-01S | 02-02S | 2.5-01S | 03-01S | 03-02S | 03-03S | 05-02S | |
| Capacity(T) | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 5 | |||
| Lifting Speed(M/Min) | 7.2 | 6.6 | 8.8 | 6.6 | 3.3 | 5.4 | 5.4 | 4.4 | 2.2 | 2.7 |
| Motor Power(Kw) | 0.8 | 1.5 | 3.0 | 3.0 | 1.5 | 3.0 | 3.0 | 3.0 | 1.5 | 3.0 |
| Rotation Speed(R/Min) | 1440 | |||||||||
| Insulation Grade | F | |||||||||
| Power Supply | 3P 220V-690V | |||||||||
| Control Voltage | 24V/36V/48V | |||||||||
| No. Of Chain | 1 | 1 | 1 | 1 | 2 | 1 | 1 | 2 | 3 | 2 |
| Spec. Of Load Chain | φ6.3 | φ7.1 | φ10.0 | φ10.0 | φ7.1 | φ11.2 | φ11.2 | φ10.0 | φ7.1 | φ11.2 |
| Net Weight(Kg) | 47 | 61 | 108 | 115 | 73 | 115 | 122 | 131 | 85 | 151 |
| Dual Speed | Technical Parameters | |||||||||
| Model | SSDHL | |||||||||
| 0.5-01D | 01-01D | 1.5-01D | 02-01D | 02-02D | 2.5-01D | 03-01D | 03-02D | 03-03D | 05-02D | |
| Capacity(T) | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 5 | |||
| Lifting Speed(M/Min) | 7.2/2.4 | 6.9/2.3 | 9.0/3.0 | 6.9/2.3 | 3.3/1.1 | 5.4/1.8 | 5.4/1.8 | 4.5/1.5 | 2.4/0.8 | 2.7/0.9 |
| Motor Power(Kw) | 0.8/0.27 | 1.8/0.6 | 3.0/1.0 | 3.0/1.0 | 1.8/0.6 | 3.0/1.0 | 3.0/1.0 | 3.0/1.0 | 1.8/0.6 | 3.0/1.0 |
| Rotation Speed(R/Min) | 2880/960 | |||||||||
| Insulation Grade | F | |||||||||
| Power Supply | 3P 220V-690V | |||||||||
| Control Voltage | 24V/36V/48V | |||||||||
| No. Of Chain | 1 | 1 | 1 | 1 | 2 | 1 | 1 | 2 | 3 | 2 |
| Spec. Of Load Chain | φ6.3 | φ7.1 | φ10.0 | φ10.0 | φ7.1 | φ11.2 | φ11.2 | φ10.0 | φ7.1 | φ11.2 |
